Table of Contents
Advertisement
8598 Aztec ib
05/08/2003
Using your Aztec
Assembly
To fit the hose to the cleaner, insert the
hose end into the hose inlet ‹ until it clips
securely into position.
Extension tubes
The type of extension tubes provided
varies depending on the model you have
purchased. Please see carton box or contact
the retailer for further details of your specific
model.
Plastic tubes (certain models only)
Attach the extension tubes to the handle
end of the hose.
Metal telescopic tube (certain models only)
Attach the telescopic tube to the handle
end of the hose. Extend to the required
length by pressing down the slider release
button Ï and pulling out the tube B.
The hose handle features an air flow
regulator Ì which allows the suction to be
reduced as required.
Attaching the accessories
Fit the floor nozzle onto the end of the
extension tube.
Other accessories are stored in the back
of the cleaner and include:
• upholstery nozzle for stairs, furniture;
• crevice tool for awkward places, behind
radiators etc.
Ï
4
10:23
Page 4
Automatic cable rewind
Reel out the cable fully. After use, unplug
and press the foot pedal ·, holding the plug
until fully rewound.
WARNING: When using the cable
rewind, always hold the plug as the
cable will rewind quickly.
On/off
The on/off control is operated by the foot
pedal ‚.
Electronic power control (certain
models)
This is a rotating knob „ which allows
the suction power of the cleaner to be set at
the precise level required. For example:
• turn fully clockwise for maximum suction
for carpets, hard floors etc.
• turn anti-clockwise for reduced suction
for upholstery and curtains.
Stair Lock
This unique device assists with stair
cleaning. The special bracket ‰, found
underneath, is lifted out as shown C and
locked onto the stairs. In addition, the rear
wheels are locked in position as further
security. After use, simply push firmly back
into position.
Please note
When cleaning on stairs, for convenience
and safety, work from the bottom to the top
with the upholstery nozzle or crevice tool
connected directly onto the hose handle. It is
recom-
B
mended that
the extension
tubes are not
used.
‰
C
Advertisement
Table of Contents
