Changing The Motor Protection Filter - Morphy Richards IB70041 Instructions Manual

Cylinder vacuum cleaner
Table of Contents

Advertisement

Changing the motor
protection filter
The motor protection filter varies by
model. It is accessible from the dust
compartment only when the dust bag has
been removed first.
IMPORTANT: Never use the appliance
without the motor protection filter installed,
otherwise damage to the motor may occur
which would not be covered by the
guarantee.
PremAir model with standard
micro hygiene filter
1 Open the flap on the filter holder.
2 Take out the filter and clean (by shaking)
or replace.
3 Close the filter holder.
It is recommended that this filter is
cleaned everytime the dustbag is changed,
and is replaced every 5 dustbag changes.
PremAir models with 3-layer
hygiene filter cassette
1 Pull out the filter cassette in an upward
direction and clean by tapping gently or
dispose of it with your household waste.
2 Put in a new filter cassette.
It is recommended that this filter should
be cleaned everytime the dustbag is
changed and replaced every 6 months, or
sooner if it starts to give an unpleasant
odour or if the dust bag has been damaged.
IMPORTANT: The filter material is
sensitive. Do not press the surface or you
may damage the filter material.
Insert the dust bag and close the dust
bag compartment cover.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Premair 70041

Table of Contents