Controller Card Data Cable Connectors; Hard Drive - Dell Precision NX046 User Manual

Controller Card Data Cable Connectors

1
3
1 power connector
3 interposer
5 SAS connector

Hard Drive

NOTICE:
Cables purchased elsewhere are not guaranteed to work with Dell computers.
Removing a Hard Drive from the Rotatable Carrier (Tower or Desktop Computer)
CAUTION:
safety instructions in the
CAUTION:
the electrical outlet before opening the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer's electronic
components. You can do so by touching an unpainted metal surface on the
computer.
NOTICE:
Instead, set the drive on a surface, such as a foam pad, that will sufficiently cushion
it.
1 If you are replacing a hard drive that contains data that you want to keep,
back up your files before you begin this procedure.
2 Follow the procedures in "Before You Begin" on page 151.
212
Adding and Replacing Parts
2
4
It is recommended that you only use SAS cables purchased from Dell.
Before you begin any of the procedures in this section, follow the
Product Information Guide
To guard against electrical shock, always unplug your computer from
To avoid damage to the hard drive, do not set it on a hard surface.
2 SAS data connector
4 SAS drive
6 optional PCI Express SAS controller card
.
5
6