Power Cable Connectors; Connecting And Disconnecting Drive Cables - Dell OptiPlex 960 Service Manual

1 data interface cable connector

Power Cable Connectors

1 power cable 2

Connecting and Disconnecting Drive Cables

When removing a cable with a pull-tab, grasp the colored pull-tab and pull until the connector detaches.
When connecting and disconnecting a cable without a pull tab, hold the cable by the black connector at each end.
Drive Bay Inserts
Your computer will come with a plastic insert with shoulder screws and a metal insert.
Removing Drive Bay Inserts
If you are installing a new drive:
1. Perform the procedure Before Working on Your
2. Press the insert retention tab on the inside of the bezel to release the drive bay insert. Remove the drive bay insert from the front of the bezel.
2 data interface connector
power input connector
Computer.