Dell Precision NX046 User Manual page 220

1 sliding-plate lever
3 power cable
5 SATA connector on system board
7 Disconnect the data cable from the back of the hard drive and from the
connector on the system board.
If it is connected to a card and you will not be reinstalling the drive, route
the data cable to the side.
8 Slide the sliding-plate lever to the right to release the shoulder screw and
slide the drive out of the FlexBay.
2
1 sliding-plate lever
9 Set the drive aside in a secure location.
NOTICE:
installed at all times while your computer is in use or your computer may not
function properly.
220
Adding and Replacing Parts
1
If metal shields are present in your computer configuration, they must be
2 SATA data cable
4 power supply
6 optional SATA hard drive in FlexBay
2 optional third hard drive in FlexBay