Dell Precision NX046 User Manual page 135

P P C
LUG AND LAY ONFIGURATION
Turn your computer off, unplug it from the electrical outlet, and then remove all
1
but one of the cards.
Plug in your computer and reboot it.
2
If the message reappears, the installed card might be malfunctioning. If the
3
message does not reappear, turn off the computer and reinsert one of the other
cards.
Repeat this process until you identify which card is malfunctioning.
4
R —
EAD FAULT
R
EQUESTED SECTOR NOT FOUND
R —
ESET FAILED
See "Drive Problems" on page 107.
S —
ECTOR NOT FOUND
• Run the Windows error-checking utility to check the file structure on the floppy
disk or hard drive. See Windows Help for instructions.
• If a large number of sectors are defective, back up the data (if possible), and then
reformat the floppy disk or hard drive.
S — See "Drive Problems" on page 107.
EEK ERROR
S — Run the Dell Diagnostics. See (see "Dell Diagnostics" on
HUTDOWN FAILURE
page 136).
T - -
IME OF DAY CLOCK STOPPED
T - -
IME OF DAY NOT SET
Enter system setup and correct the date or time (see "System Setup" on page 89). If
the problem persists, replace the battery (see "Battery" on page 176).
T
IMER CHIP COUNTER
on page 136).
E —
RROR
—
—
—
2 — Run the Dell Diagnostics. See (see "Dell Diagnostics"
FAILED
Troubleshooting Tools
135