Table of Contents
Advertisement
top anchor tabs (2)
side anchor tabs (2)
bottom anchor tabs (2)
Installing the Processor Airflow Shroud
Follow the instructions in "Before You Begin" on page 68.
1
Open the computer cover (see page 70).
2
Insert the bottom anchor tabs into the anchor slots.
3
Align and insert the side anchor tabs into the anchor slots.
4
Press the indentations until the top anchor tabs on the shroud snap securely into place.
5
Close the computer cover (see page 102).
6
NOTICE:
the computer.
Connect your computer and devices to electrical outlets, and turn them on.
7
92
Removing and Installing Parts
To connect a network cable, first plug the cable into the network wall jack and then plug it into
airflow shroud
indentations (2)
Advertisement
Table of Contents
