Error Message
Communication Error
Message on the PC screen:
Cause
• The copier is not ready.
• PC or copier system crash during commu-
nication.
• USB cable does not connect properly dur-
ing communication.
Scanner Busy
Message on the PC screen:
Cause
• If TWAIN scanning and copy jobs are being
performed at the same the time, the copier
may stop in the middle of scanning.
Di1611/Di2011 Twain Driver
Remedy
1. Turn the copier OFF, then check if the
USB cable is connected properly or not.
2. After checking the USB cable carefully,
turn the copier ON again.
3. If you still cannot fix the problem, call
your service representative.
Remedy
• Wait until Copy or all scanning is over.
6
6-3