Installing The Device And Drivers; Installing The Docking Station Driver - Targus UNIVERSAL LAPTOP DOCKING STATION User Manual

installing the Device
and Drivers
To use the Targus docking station, you must first install
the driver onto your computer.
WarNiNg: yOU mUST iNSTall ThE SOfTWarE BEfOrE
cONNEcTiNg ThE dOckiNg STaTiON TO yOUr cOmpUTEr.
OThErWiSE, ThE dOckiNg STaTiON Will NOT WOrk prOpErly.
After installing your software, connect the docking station
to your computer and Windows plug-and-play will install
the hardware drivers for each port.
installing the Docking Station
Driver
Installing the docking station driver enables your
operating system to recognize it and its ports once it's
connected.
1 Turn on your computer.
2 Insert the driver software CD into your computer's
CD-ROM drive.
If setup does not begin automatically, click Start, Run,
and enter D:\ACP45_setup.exe (where D: is the path of
your CD-ROM drive) and then click OK.
Targus Universal Laptop Docking Station