Package Contents; System Requirements; Installing The Device And Drivers; Installing The Docking Station Drivers - Targus USB 2.0 Laptop Docking Station with Video User Manual

Targus USB 2.0 Laptop Docking Station with Video

Package Contents

In addition to this user guide, the package contains:
• Targus USB 2.0 Laptop Docking Station with Video
• High-speed USB 2.0 upstream cable
• Driver software CD (mini CD)
• AC power adapter (required)

System Requirements

Hardware
• PC with an Intel Pentium processor or equivalent
® ®
• CD-ROM drive (support mini CD)
• USB version 2.0 port
• AC power source (AC adapter required)
Operating System
• Mircosoft Windows Vista with Service Pack 1 (32-bit or 64-bit)
®
• Mircosoft Windows XP with Service Pack 3
®
• Mircosoft Windows 7
®
NOTE: WHEN CONNECTED TO A USB VERSION 1.1 PORT ON YOUR COMPUTER, THE DOCKING
STATION'S PERFORMANCE LEVEL WILL BE LESS THAN OPTIMAL AND THE VIDEO PORT WILL
NOT FUNCTION PROPERLY. FOR BEST RESULTS, CONNECT IT TO A USB VERSION 2.0 PORT.
4
Targus USB 2.0 Laptop Docking Station with Video

Installing the Device and Drivers

To use the Targus Docking Station, you must first install the driver onto
your computer. Then, connect the docking station to your computer and
Windows plug-and-play will install the hardware drivers for each port.
WARNING: YOU MUST INSTALL THE DOCKING STATION SOFTWARE BEFORE CON-
NECTING IT TO YOUR COMPUTER. OTHERWISE, THE DOCKING STATION WILL NOT
WORK PROPERLY.
Installing the Docking Station Driver
Installing the docking station driver enables your operating system to
recognize the docking station and its ports once it's connected.
1 Turn on your computer.
2 Insert the driver software CD into your computer's CD-ROM drive.
If setup does not begin automatically, click Start, Run, and enter D:\
Setup.exe (where D: is the path of your CD-ROM drive) and then click
OK.
3 Follow any on-screen instructions to complete the installation.
4 Click Finish and restart your computer when prompted.
5