Installing The Device And Drivers - Targus Universal notebook docking station User Manual

Targus Universal Notebook Docking Station
Installing the Device and
Drivers
To use the Targus Docking Station, you must first install
the driver onto your computer.
WARNING: Y
CONNECTING IT TO YOUR COMPUTER
WILL NOT WORK PROPERLY
After installing your software, connect the docking station
to your computer and Windows plug-and-play will install
the hardware drivers for each port.
Installing the Docking Station Driver
Installing the docking station driver enables your
operating system to recognize it and its ports once it's
connected.
1 Turn on your computer.
2 Insert the driver software CD into your computer's
CD-ROM drive.
If setup does not begin automatically, click Start, Run,
and enter D:\Setup.exe (where D: is the path of your
CD-ROM drive) and then click OK.
OU MUST INSTALL THE
.
D S
OCKING TATION SOFTWARE
. O
THERWISE
6
BEFORE
, D S
THE OCKING TATION