Verifying A Serial Modem Connection; Error Message On Your Pda - Targus UNIVERSAL LAPTOP DOCKING STATION User Manual

Targus Universal Laptop Docking Station
verifying a Serial Modem
connection
When attaching a modem to the serial (RS232) port,
verify that the port assigned to your modem is Serial USB
(COMx), where x is the number of the COM port.
If the operating system does not detect automatically that
your modem is assigned to Serial USB (COMx), run the
Hardware Wizard again and choose Select from the list
instead of Autodetect. Then, select use Prolific Device
from Page as the COM port.

error Message on Your pDA

If the error message "Connection Not Established"
appears on your PDA, check that the COM port setting in
either your HotSync or ActiveSync software matches the
setting on the docking station. See "Verifying Devices are
Installed" to verify the COM port setting on the docking
station.
Some older versions of the Palm Desktop software are
®
not compatible with the USB to Serial conversion. Please
contact your PDA vendor for software updates.
Palm and HotSync are registered trademarks of Palm, Inc. Microsoft, Windows, Windows
Vista and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries. All trademarks and registered trademarks are
the properties of their respective owners. All rights reserved. Features and specifications are
subject to change without notice. © 2008, Targus Group International, Inc. and Targus Group
(UK) Ltd.
20