Channel Tuning Setup - Audiovox LCM1041TV Owner's Manual

mode. For more information consult the VCP owner's
manual.
12. PLAY BUTTON
Press this button to activate play mode while a tape is
loaded into the VCP. This button may also be used to
disengage search and pause modes. For more
information, consult the VCP owner's manual.
13. "FFWD" FAST FORWARD BUTTON
If this button is pushed while the tape is stopped, tape
will fast forward. If this button is pressed while the
tape is playing, the VCP will go into fast forward
search mode. For more information on the search
feature of the VCP, consult the VCP owner's manual.
14. STOP BUTTON
Press this button to stop the tape.
15. REPLAY BUTTON
During playback, press this button to rewind the tape
to the beginning and to begin PLAY mode from there.

CHANNEL TUNING SETUP

In order to easily access all available channels, it may be necessary to perform channel auto-
programming whenever the vehicle's geographic location has changed, i.e. city to city, weak signal area.
1. Press the AUTO MEMORY button on the remote
control unit. You will see the TV cycle through all it's
channels. The built-in microprocessor will
automatically note each channel that is actively
broadcasting in your area.
2. (A) To tune only strong clear channels with the
CHANNEL UP/DOWN buttons, press the
SKIP/SEARCH button on the Remote Control Unit
until "SKIP MODE ON" is displayed on the bottom
of the screen. The TV will now tune only to strong