Audiovox LCM1041TV Owner's Manual page 8

7. SKIP / SEARCH BUTTON
This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV only stops on
channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When
SKIP is turned off, the TV will only stop on all active channels.
8. ERASE / WRITE BUTTON
When tuned to a channel, press this button to store or erase the channel from memory. The stored
channel numbers are displayed in green on the screen, and the non-stored channels are in red.
When skip mode is on, the LCM1041TV will tune to only the stored channels when using the
CHANNEL UP/DOWN buttons.
9. AUTO PROGRAM BUTTON
When the AUTO PROGRAM button is pressed, the
TV screen will show an important information screen
and all the channel numbers for TV will be scanned.
When the AUTO PROGRAM button is pressed, the TV screen will show
an IMPORTANT information screen, all the channel
numbers for TV or CABLE TV will be scanned. The
broadcasting signals will be detected and
automatically stored.
REMOTE CONTROLLED VCP FUNCTIONS
These features can only be used with a Flexvision Video Cassette Player, if this option was installed with
your video package.
10. VCP POWER BUTTON
This button is used to turn the VCP on and off.
11. "REW" REWIND BUTTON
If this button is pushed while the tape is stopped, the
tape will rewind. If this button is pushed while the
tape is playing, the VCP will go into rewind search