Audiovox LCM1041TV Owner's Manual page 7

Remote Controlled TV Functions
1. POWER ON/OFF
Press this button to turn the LCM1041TV on. The channel number or current video source will be
displayed on screen, and the picture will appear in a few seconds. Press the button again to turn the
LCM1041TV off.
2. DIRECT ACCESS (0-9) BUTTONS
Use these buttons to make a direct channel selection. The channel number chosen will be displayed
on the screen for about 4 seconds. To select channels 0-99, press two number buttons. For
example, to select channel 8, press 0, 8. To select channels above 100, press the 1-- button, then the
number buttons for the last two digits of the channel. For example, to select channel 115, press 1--, 1,
5.
3. CHANNEL UP/DOWN BUTTONS
Use these buttons to advance to the next higher or lower channel.
4. VOLUME UP/DOWN BUTTONS
Use these buttons to raise or lower the volume level of the external speaker if installed.
5. TV / VIDEO BUTTON
Any video equipment connected to the AUDIO/
VIDEO inputs can be used with the TV by pressing
this button. Each time the button is pressed, the
Audio/Video source will change in the following
sequence VIDEO 1, VIDEO 2 and TV.
6. MUTE BUTTON
Press this button to turn TV sound off. Press again
to restore sound to the previously set level. Mute
may also be released by pressing the VOLUME +/-
buttons.