Typical System Connections - Audiovox LCM1041TV Owner's Manual

Flexvision Video Cassette Player (Aux Video 1)
In most installations a VCP will be connected to the "Video 1" input. To view a video cassette, turn the
AVP7000/ AVP7285 on and press the source button on its control panel or the TV/Video button on the
remote control unit until "Video 1" is displayed on the screen. The VCP may also be operated with the
remote control or the buttons on its face. Inserting a tape into the VCP will turn it on and automatically
activate the play mode. If a rewound tape had been loaded into the VCP, prior to its activation press
play on the VCP or the remote control to view the tape. For more information see the owner's manual
accompanying your VCP.

TYPICAL SYSTEM CONNECTIONS

PIN 1 – Power/ Red
PIN 2 – Power GND/ Black
PIN 3 – Audio(L)Out/ Grey
PIN 4 – Audio GND/ Black
PIN 5 – Audio(R)Out / Green
Red (Audio Out R)
White (Audio Out L)
Yellow (Video out)
T o FM Transmitter
Accessory
Harness
2 PIN IR
Connector
Yellow RCA(Video)
White RCA(Audio Left)
4 PIN
Power
Red RCA(Audio Right)
Connector
Antenna