Dell Precision 410 Service Manual page 62

4-6 Dell Precision 410 Systems Service Manual
To insert a new reset button, align the three clips with the corresponding holes
in the computer cover. Then press firmly on the button from the outside of the
computer cover to latch the button place.
ring-tabs (2)
front panel
insert
)LJXUH  ,QFK )URQW3DQHO ,QVHUW 5HPRYDO
To remove a 5.25-inch front-panel insert, work from the outside of the cover.
Press in on each end of the insert with your thumbs until the insert snaps free
of the cover (see Figure 4-4).
To replace a front-panel insert for a 5.25-inch bay, work from inside the cover.
Insert the two ring-tabs (one on each end of the insert) over the posts on the
inside of the bay opening, and firmly press both ends of the insert into place.
posts (2)