Dell Precision 410 Service Manual page 51

Dell service manual desktop pc
Hide thumbs Also See for Precision 410:
Table of Contents

Advertisement

Bad error-
correction code
(ECC) on disk
read
Boot: Couldn't
find NTLDR
Controller has
failed
Data error
Decreasing
available
memory
Diskette drive 0
seek failure
Diskette drive 1
seek failure
Diskette read
failure
Diskette sub-
system reset
failed
Diskette write
protected
Drive not ready
ECC memory
error
FRQWLQXHG
Diskette drive or hard-
disk drive controller
detected an uncorrect-
able read error.
A nonbootable diskette
formatted with Win-
dows NT was detected
in the diskette drive.
Hard-disk drive or
associated controller is
defective.
System received un-
recoverable data-read
error from diskette or
hard-disk drive.
Read/write failure
during POST prevents
system from using avail-
able memory.
Diskette/tape drive con-
troller could not locate
specific sector or track.
Failure occurred while
system attempted to
read diskette.
System could not suc-
cessfully issue reset
command to diskette
controller.
Diskette write-protect
feature was activated.
Diskette is missing from
or is improperly inserted
in diskette drive.
Uncorrectable multibit
ECC memory error is
detected.
Beep Codes and Error Messages
Faulty diskette/tape drive
subsystem or hard-disk
drive subsystem (defec-
tive system board).
A nonbootable diskette is
preventing the system
from booting. Remove
the diskette to boot the
system from the hard-
disk drive or from a
bootable diskette.
Faulty hard-disk drive
subsystem or defective
system board.
Faulty diskette, diskette
drive, or hard-disk drive.
One or more DIMMs are
faulty or improperly
seated.
Faulty or improperly
inserted diskette,
incorrect settings in Sys-
tem Setup program,
loose diskette/tape drive
interface cable, or loose
power cable.
Faulty diskette, faulty or
improperly connected
diskette/tape drive inter-
face cable, or loose
power cable.
Faulty diskette/tape drive
controller (defective sys-
tem board).
Diskette is write-
protected.
Missing, defective, un-
formatted, or improperly
inserted diskette.
Faulty or improperly
seated DIMMs or defec-
tive system board.
3-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents