Table of Contents
Advertisement
Check that the two locking screws on the secondary battery are in the unlocked
4.
position.
T
In the unlocked position, the round dimple on the screw aligns with the small
dot under the unlocked padlock symbol.
T
Use a flat-blade screwdriver to turn the screw(s) to the unlocked position.
Optional secondary battery
A – Locking Screws (2)
Align the battery pack on the notebook, label side up, with the locking screws
5.
directly over the locking slots on the notebook (see the previous figure to locate the
locking slots).
Set the battery pack down on the notebook, ensuring that the two locking screws
6.
are in the locking slots.
7.
Slide the battery pack toward the front of the notebook, away from the primary
battery, until the battery pack locks in place.
8.
Turn the locking screws to the locked position.
T
Don't force the screws. If the screws don't turn easily, reseat the battery pack
by sliding it towards the primary battery and then away from the primary
battery.
T
When locked, the round dimple on the screw aligns with the dot next to the
locked padlock symbol.
B – Secondary Battery
Adding Expansion Devices 5-19
Advertisement
Table of Contents
