Table of Contents
Advertisement
applications installed on your system.
If the hard disk is configured with multiple or extended partitions you may have to
reinstall some software to restore configuration settings and shared files.
5.
Read the Warning screen.
A warning displays indicating that drive C: (the primary drive/partition) is about to
be erased and formatted. It may be necessary to reinstall software to the other
drives (partitions) to reestablish Start Menu links and other configuration
requirements stored on drive C:.
Select Continue to proceed to perform a Partition Only restore.
6.
If you select Back, the recovery utility returns to the prior screen, which has an exit
option. If you select Continue, an NEC screen loads.
7.
At the NEC screen, click Continue to start the recovery process.
A screen with progress bars is displayed and indicates the progress of the recovery.
process.
If you are restoring the Windows 2000 operating system, the recovery program
prompts you for the next CD.
If you are restoring Windows 2000, remove CD1 at the prompt for the next CD
and insert CD2 into the CD-ROM drive.
When the recovery process is complete for either Windows XP or Windows 2000,
you are prompted to remove the CD from the CD-ROM drive and reboot your
system.
At the prompt, remove the CD from the drive. Press
8.
to reboot your system.
Alt-R
A series of hardware detection screens display, the system reboots, and the
Windows Setup screen appears. Follow the on-screen instructions to set up
Windows.
You are required to reenter your Microsoft license number.
Choose your restore option carefully to prevent losing data and
Do not turn off or disturb the system during the recovery
Using the Operating System and Utilities 4-15
, click Reboot, or press
Enter
Advertisement
Table of Contents
