NEC VERSA DAYLITE E120 User Manual page 56

Press and then press
6. Y
not restart the system until the you are instructed to restart.
cause damage to the system.
Remove the diskette and press any key to continue. The utility updates the BIOS.
7.
Power off your computer. The next time you power on your computer, you will
have the latest NEC Versa E120 DayLite computer BIOS revision level.
8. Power on your computer. A CMOS Checksum message appears and prompts you
to press F2 to enter Setup.
9. Press F2 to enter Setup and restore the default parameter settings.
Reconfigure Setup with the custom settings you documented for yourself before
10.
beginning this procedure.
Press to save changes and exit Setup.
11. F10
. A message informs you of the update progress. Do
Enter
Interrupting the BIOS update during the update process can
Using the BIOS Setup Utility 3-15