Table of Contents
Advertisement
GUIDE TO NEC UTILITIES
NEC provides several programs and routines designed to
make your NEC Versa run more efficiently. These pro-
grams are known as utilities.
Setup
The Setup utility automatically configures your NEC Versa
each time you start it up. This utility is not accessible from
Windows. Access Setup at power-on. Just press
the following prompt appears.
Press <F2> to enter SETUP
See Chapter 3, "Using Setup," for a discussion of the Setup
utility. In addition, online help assists you in changing set-
tings.
Battery Gauge Utility
This utility lets you quickly identify how much battery
power you have available. (Windows for Workgroups
modesl only)
PHDisk
This utility creates a file on the hard disk that is large
enough to contain all the program and data residing in the
NEC Versa dynamic memory. Your system ships with a file
that is approximately 17 MB. You only need to update this
file size if you upgrade the amount of memory in your sys-
tem to more than 16-MB. Run this utility in DOS mode or
DOS environment. It will not run on a compressed drive
To use this utility, exit Windows and go to the DOS
prompt. Enter the following at the DOS prompt:
PHDisk /create
After executing this command, the file is resized based on
the current NEC Versa memory size.
when
F2
Understanding the Software 2-7
Advertisement
Table of Contents
