Table of Contents
Advertisement
!
CAUTIONS
This equipment uses an ungrounded power cable.
Replace the cord if it becomes damaged. U.S. and
Canadian replacement cords must be UL-approved
(CSA certified in Canada) type SPT-2, 18 AWG,
2-conductor cord with a permanently attached
NEMA type 5-15P plug at one end, and a perma-
nently attached connector body on the other. Cord
length may not exceed 15 feet. Outside the U.S.
and Canada the cord must be rated for at least
250VAC at 10 amps, and must indicate international
safety agency approval. The plug must be a type
appropriate for the country where it is used.
Obtain replacement cords at an authorized service
center. The replacement must be of the same type
and voltage rating as the original cord.
Disconnect all supply lines before the expansion
memory slot cover is removed. Replace the expan-
sion memory slot cover before the unit is restarted.
Getting Started 1-25
Advertisement
Table of Contents
