Table of Contents
Advertisement
Printing with Your SuperScript 660
Take note of the following points when creating
documents with several colors.
NEC recommends the use of sheets that are
2
20 lb (75 g/m
) or thicker.
NEC does not recommend printing on OHT
films.
NEC does not recommend creating documents
with more than two colors for use with this
printer.
The alignment of the print on the page will vary
with each pass through the printer therefore if
colors are overlapping or very close the output
may be affected.
Observe the following precaution when printing
overlapping solid objects to prevent paper jams
or wrinkling: Minimize overlapping areas and
position them at some distance (minimum 1 1/2
in. recommended) from the top edge of the sheet
as follows.
3–21
Advertisement
Table of Contents
