Table of Contents
Advertisement
5–12
Print Status Window
Power Off or Cable Problem
NEC SuperScript software cannot find your
printer because:
1. the printer is off.
2. the printer's parallel cable is not
installed properly.
3. a problem exists within the
connection or the parallel cable is defective.
Verify the printer is powered on and the left
printer status light (LED) is lit or blinking.
Check that the parallel cable is correctly con-
nected to the printer and the PC.
Pause
The PAUSE button lets you pause printing while
you do something else. For example, you can
pause in order to change to colored paper in the
printer.
Resume
The RESUME button lets you continue printing
after you have paused printing, or after the
printer recovers from an error situation.
Delete
The DELETE button lets you delete the current
print job. You must pause the job before you can
delete it. Additionally, you may delete a print
job halted due to an error situation like paper out.
Advertisement
Table of Contents
