NEC POWERMATE CT 815 Manual page 51

Advanced Menu - Power Management Setup
Menu Item
Resume on LAN
Resume on RTC Alarm
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
Settings (default is bold)
Disabled, Enabled
The Enabled setting automatically reboots the system
when a signal is sent through a LAN.
Disabled, Enabled
When Enabled, you can choose the time the system
boots up (see the following time settings).
15, Every Date
Sets the day that the system boots up (when Resume
on RTC Alarm is Enabled).
12, 1-00
Sets real time clock alarm hour (when Resume on
RTC Alarm is Enabled).
30, 0-59
Sets real time clock alarm minute (when Resume on
RTC Alarm is Enabled).
30, 0-59
Sets real time clock alarm second (when Resume on
RTC Alarm is Enabled).
Configuring the System 3-15