How To Use Setup - NEC POWERMATE CT 815 Manual

How to Use Setup

The Setup Utility has a Main Menu window and four top-level menus
with submenus. The menu bar at the top of the Main Menu window lists
the following top-level menus.
Main Use the Main Menu for basic system configuration. For
!
example, select Main to set the system date, set diskette and hard disk
parameters, or set the hard drive auto-detect feature.
Advanced
!
advanced CMOS, advanced chipset, power management, Plug and
Play, serial and parallel peripherals, and hardware monitor.
Security Use this menu to set User and Supervisor Passwords and
!
password check.
Exit Exits the Setup Utility with various save or discard options.
!
Use the keys listed in the legend bar on the bottom of the menu screen to
make the selections or exit the current menu. Help Setup information is
displayed on the right side of the menu screen.
The following table describes the legend keys.
Key
Esc
Enter
F1
F5
F6
F10
Up or down arrow keys
Use the Advanced Menu to set up the system for
Navigation Keys
Function
Exits the menu.
Executes Command or brings up a
submenu.
Press this key on any menu for help.
Loads default values.
Loads setup original values.
Saves changes and Exits the BIOS Setup
Utility.
Moves cursor up and down in the menu.
Configuring the System 3-5