Message Tune Volume
To change the message tune volume when a message or Email is received:
*
Press 4 to display the Message volume screen with a volume slider.
Press
(Up) to increase or
(Down) to decrease the volume setting to the level required (the slider moves in direction of the corresponding key pressed) or
input the number (0-Quiet to 9-Loud) for the volume level.
Press Softkey 1 (OK) or (Select/Save) to save the current message tune volume setting and return to the previous menu.
Press Softkey 2 (Cancel) to reject any ring volume changes and return to the previous menu, press CLR (Clear/Back) to return to the previous screen with no
changes, or press (End) to exit and return to the Idle screen.
Key Tone
The key tone is the short tone you hear when pressing number buttons. To turn key tones on or off:
*
Press 5 to display the Key tone screen.
Press 1 (On) for the tones to sound or press 2 (Off) for no tones to sound and return to the previous menu.
Service Tone
The service tone is sounded when travelling into and out of the area where the network provides service. To turn the service tone on or off:
*
Press 6 to display the Service tone screen.
Press 1 (On) for the tones to sound or press 2 (Off) for no tones to sound and return to the previous menu.
Vibrate
The phone vibrates when a call is received. To turn vibrate on or off:
*
Press 7 to display the Vibrate screen.
Press 1 (On) for the phone to vibrate or press 2 (Off) for no vibration and return to the previous menu.
Backlight
The backlight setting allows you to set the brightness backlight and the number of minutes before the main LCD backlight turns off.
*
Press 8 to display the Backlight screen.
Highlight and select the preferred brightness (High, Medium, or Low).
Scroll to and highlight the Minutes field. Input 0 (turns off immediately after 15-minute timeout) to 99 for the length of time before the backlight turns Off. The
default value is 2 minutes.
Press Softkey 1 (OK) to save the backlight settings or press Softkey 2 (Cancel) to reject any changes and return to the previous menu.
36
Press
(Up) or
(Down) navigation
key to move the highlight bar to the previous
or next item in a list.
Press CLR (Clear/Back) to return to the
previous screen without saving any changes.
Press (End) to exit the screen and return to
the Idle screen.