Message Tune Volume; Key Tone; Service Tone; Vibrate - NEC 525 Manual

Table of Contents

Advertisement

Message Tune Volume

To change the message tune volume when a message or Email is received:
*
Press 4 to display the Message volume screen with a volume slider.
Press to
(Up) increase or to
the corresponding key pressed) or input the number (0-Quiet to 9-Loud) for the volume level.
Press Softkey 1 (OK) or
Press Softkey 2 (Cancel) to reject any ring volume changes and return to the previous menu, press CLR (Clear/Back) to return
to the previous screen with no changes, or press

Key Tone

The key tone is the DTMF tones that sound when pressing number buttons. To turn key tones on or off:
*
Press 5 to display the Key tone screen.
Press 1 (On) for the tones to sound or press 2 (Off) for no tones to sound and return to the previous menu.

Service Tone

The service tone is sounded when traveling into and out of the area where the network provides service. To turn the service tone on or
off:
*
Press 6 to display the Service tone screen.
Press 1 (On) for the tones to sound or press 2 (Off) for no tones to sound and return to the previous menu.

Vibrate

The phone vibrates when a call is received. To turn vibrate on or off:
*
Press 7 to display the Vibrate screen.
Press 1 (On) for the phone to vibrate or press 2 (Off) for no vibration and return to the previous menu.

Backlight

*
Press 8 to display the Backlight screen.
Press
(Up) or
(Down) navigation key to highlight the preferred brightness (High, Medium, or Low) or power-save and
press
(Select) to select the highlighted option.
Highlight the Minutes field and input 0 (always Off) to 99 for the length of time before the backlight turns Off. The default value is
2 minutes.
Press Softkey 1 (OK) to save the backlight settings or press Softkey 2 (Cancel) to reject any changes and return to the
previous menu.
(Down) decrease the volume setting to the level required (the slider moves in direction of
(Select/Save) to save the current message tune volume setting and return to the previous menu.
(End) to exit and return to the Idle screen.
O
Press
(Up) or
(Down)
navigation key to move the highlight
bar to the previous or next item in a
list.
O
Press CLR (Clear/Back) to return to
the previous screen without saving
any changes.
O
Press
(End) to exit the screen
and return to the Idle screen.
34

Advertisement

Table of Contents
loading

Table of Contents