While making the call, the screen displays the phone number dialed with a name (if a name has been stored in a phonebook along with the number--see page 93) and a

connection graphic or a phonebook picture if one has been allocated to the number called (see page 98).

The number dialed and information related to the number dialed is stored in the dialed calls list. The last 20 calls made are stored. Each time you make a call after the

dialed call list is full, the oldest call drops off the list and the newest call is placed at the top of the list.

Press

(Send) to access the dialed call list from the Idle screen.

Using Voice Dialing

Press and hold the

(Down) navigation key. You are prompted with, "Please say a command."

To call a contact from the phone book for which you previously recorded a voice tag (refer to page 39) say "Call". If the command is recognized, the phone will

respond with, "Please say a name." If the command is not recognized, you will be prompted with "Command not recognized. Try again."

Speak the name of the call recipient into the phone. If the phone does not recognize the voice tag, you are prompted with, "Name not recognized. Try again". In

this case, you may re-speak the call recipient's name up to 3 times before the voice tag function ends. Press Softkey1 (OK) to return to the Main LCD.

If you have set "Tone" for the Audio prompts setting, then the phone will not "speak" to you, but only emit a tone for each prompt.

Using Digit Dialing

Press and hold the

(Down) navigation key. You are prompted with, "Please say a command."

To dial a random phone number, say "Dial". If the command is recognized, the phone will respond with "Please say a phone number." If the command is not

recognized, you will be prompted with "Command not recognized. Try again."

Speak the phone number you wish to dial. If the phone recognizes the correct number of digits (refer to page 39), the phone will repeat the phone number to dial.

Based on the settings "Ask before dial" and "Results display", the phone may immediately dial the number after repeating the digits. If "Ask before dial" is set to

"Ask" then the phone will respond to your voice digit input with the question "Dial <phone number digits>?" You must respond with "Yes", "No", or

Softkey1 (Yes), or Softkey2 (No). If you select Yes, then the phone will respond with "Calling <phone number digits>". If you select No, then the phone

will return to the idle screen.

(Send) after entering the area code and phone number to ensure the

If you find that the phone has trouble

recognizing your speech, try to perform Voice

Dialing Personalization, refer to page 97.

Table of Contents