Table of Contents
Advertisement
CHAPTER 3 | Getting Connected
The EZ Connect Powerline to USB Adapter is connected between the USB port on your Windows-
based PC and the Powerline Network. The Powerline network is automatically created once you
plug in the first Powerline Device.
Power cord
connected to
Powerline Port
Basic Installation Procedure
1. CONNECT the LAN
Connect an USB cable from your PC to the Powerline to USB Adapters USB 1.1 port on the back
on the device.
2. CONNECT the Powerline
Run the included Power cord from the Powerline connector on the Adapter to an available
power outlet in your home.
Note: For best performance, connect device directly to wall outlet. Do not connect to surge
protector power bar.
COMPUTER
connected to
USB Port
Advertisement
Table of Contents
