Table of Contents
Advertisement
CHAPTER 5 | Using the EZ Configuration Utility
To access the EZ Configuration Utility, follow the steps below:
1. Click on the [Start] button
2. Choose [Programs]
3. Select the [SMC EZ HomePlug Configuration Manager 1.0] folder, and
then click on the [SMC EZ HomePlug Configuration Manager 1.0] icon.
Note: Before you run this utility please make sure that you have a SMC Powerline device connected
directly to the PC.
The SMC EZ Configuration Utility window is shown below. With this utility you can configure and
manage all of your SMC Powerline devices.
This section will show the
available Powerline devices
on your network
The [Add Device] button
allows you to add remote
Powerline devices.
The [Network Password]
button
The [Diagnostics] button launches the built-
in utility to troubleshoot your Powerline
network
Advertisement
Table of Contents
