Igmp Filtering - SMC Networks 8028L2 - annexe 1 Management Manual

C
OMMAND
IGMP throttling sets a maximum number of multicast groups that a port
can join at the same time. When the maximum number of groups is
reached on a port, any new IGMP join reports will be dropped.
E
XAMPLE
IGMP>throttling 9 5
IGMP>
This command displays or sets IGMP group filtering for specified ports.

igmp filtering

S
YNTAX
igmp filtering [port-list] [add | del] [group-address]
D
EFAULT
None
C
OMMAND
Multicast groups specified by this command are denied access on the
specified ports. When filter groups are defined, IGMP join reports received
on a port are checked against the these groups. If a requested multicast
group is denied, the IGMP join report is dropped.
E
XAMPLE
IGMP>filtering 9 239.1.1.1
IGMP>
U
SAGE
port-list - A specific port or a range of ports. (Range: 1-28, or all)
add - Adds a new IGMP group filtering entry.
del - Deletes a IGMP group filtering entry.
group-address - IGMP multicast group address.
S
ETTING
U
SAGE
– 279 –
| IGMP Commands
C 17
HAPTER