Displaying The Mac Address Table; Figure 63: Dhcp Relay Statistics - SMC Networks 8028L2 - annexe 1 Management Manual

D MAC A
ISPLAYING THE
W I
EB NTERFACE
To display DHCP relay statistics, click Monitor, DHCP, Relay Statistics.

Figure 63: DHCP Relay Statistics

T
DDRESS ABLE
Use the MAC Address Table to display dynamic and static address entries
associated with the CPU and each port.
P
ARAMETERS
These parameters are displayed on the MAC Address Table:
Start from VLAN # and MAC address # with # entries per page -
◆
These input fields allow you to select the starting point in the table.
Type - Indicates whether the entry is static or dynamic. Dynamic MAC
◆
addresses are learned by monitoring the source address for traffic
entering the switch. To configure static addresses, refer to
the MAC Address Table" on page
VLAN - The VLAN containing this entry.
◆
◆ MAC Address - Physical address associated with this interface.
Port Members - The ports associated with this entry.
◆
– 179 –
| Monitoring the Switch
C 5
HAPTER

Displaying the MAC Address Table

98.
"Configuring