Diagnosing Switch Indicators; Table 11: Troubleshooting Chart; A T Roubleshooting - SMC Networks 8028L2 Installation Manual

10/100/1000 28-port gigabit ethernet switch
Hide thumbs Also See for 8028L2:
Table of Contents

Advertisement

A
T
D
IAGNOSING

Table 11: Troubleshooting Chart

Symptom
PWR LED is Off
DIAG LED Flashing
Yellow
Link LED is Off
ROUBLESHOOTING
S
I
WITCH
NDICATORS
Action
Check connections between the switch, the power cord and
the wall outlet.
Contact your dealer for assistance.
Power cycle the switch to try and clear the condition.
If the condition does not clear, contact your dealer for
assistance.
Verify that the switch and attached device are powered on.
Be sure the cable is plugged into both the switch and
corresponding device.
If the switch is installed in a rack, check the connections to
the punch-down block and patch panel.
Verify that the proper cable type is used and its length does
not exceed specified limits.
Check the adapter on the attached device and cable
connections for possible defects. Replace the defective
adapter or cable if necessary.
– 63 –

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tigerswitch smc8028l2

Table of Contents