Table 1: Supported Sfp Transceivers - SMC Networks 8028L2 Installation Manual

10/100/1000 28-port gigabit ethernet switch

Hide thumbs Also See for 8028L2:

Management manual (392 pages)

Table Of Contents

Table of Contents

Each port also supports IEEE 802.3x auto-negotiation of flow control, so the

switch can automatically prevent port buffers from becoming saturated.

SFP T

RANSCEIVER

The Small Form Factor Pluggable (SFP) transceiver slots are shared with four of

the RJ-45 ports (ports 25-28). In the default configuration, if an SFP transceiver

(purchased separately) is installed in a slot and has a valid link on the port, the

associated RJ-45 port is disabled. The switch can also be configured to force the

use of an RJ-45 port or SFP slot, as required.

The following table shows a list of transceiver types which have been tested with

the switch. For an updated list of vendors supplying these transceivers, contact

your local SMC dealer. For information on the recommended standards for fiber

optic cabling, see "1000 Mbps Gigabit Ethernet Collision Domain" on page 60.