GVRP Configuration
GARP VLAN Registration Protocol (GVRP) defines a method for
switches to exchange VLAN information in order to register VLAN
members on ports across the network. VLANs are dynamically configured
based on join messages issued by host devices and propagated throughout
the network. Use the GVRP page to enable automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
(Default: Disabled)
Note: GVRP will also be enabled if the VLAN Mode selection under the
VLAN Configure screen is set to "802.1QwithGVRP."
Console – Click Protocol Related Configuration=>GVRP. Enable or
disable GVRP, then save your settings.
actions->
Tab=Next Item
Tiger Switch 10/100 6709GL2 : GVRP Configuration
===========================
GVRP : Disabled
<Edit>
Select the action menu.
BackSpace=Previous Item
P
R
ROTOCOL
ELATED
<Save>
Quit=Previous Menu
C
ONFIGURATION
<Quit>
Enter=Select Item
M
ENU
4-51