Table of Contents
Advertisement
Player front controls
Switching on/off – POWER
To switch on the player:
Switch on the ignition.
Press the POWER button on the player.
To switch off the player:
Press the POWER button on the player,
or:
Switch off the ignition.
Loading a disc
Press the I button on the player.
The front panel will fold down slowly.
Insert the disc with printed side facing
up.
:
The player starts playback automatically.
Ejecting a disc – E
Press the I button.
Let the panel fully fold down, then press
the E button on the operating panel.
Remove the disc and close the front
panel.
Resetting the unit – RESET
The RESET button has to be activated for the
following reasons:
Initial installation of the unit when all
wiring is completed.
The player does not respond to any of
the function buttons.
Error symbol on the display.
Activate the RESET button with either a
ballpoint pen or thin metal object.
Front display brightness – GOTO
In STOP mode:
Press GOTO on the remote control to
adjust the brightness of the VFD display
in the following order.
Brightness level:
4 –> 3 –> 2 –> 1 –> 4 ...
Choosing a higher brightness level will
increase the VFD lighting.
BASIC OPERATION
Starting/stopping playback
DVD
Press the S button to stop playback.
The player stores the current disc
position.
Press the P button to resume playback
at the stored position.
Press the S button twice to stop the
playback and to go back to the initial
track/chapter of the inserted disc.
The player is now in STOP mode.
VCD/CD/MP3
Press the S button to stop playback.
The player is now in STOP mode.
Press the P button to start playback at
the initial track of the inserted disc.
Pause (still picture)
Press the P button during playback.
Press the P button once again to
resume normal playback.
Fast forward / reverse
Press the REW < or > FFW button
during playback.
Each time the button is pressed, the
speed of fast forward / reverse changes
as follows:
Normal playback –> 2× –> 4× –> 6× –> 8×
19
Advertisement
Table of Contents
