Dell PowerEdge R610 Hardware Owner's Manual page 50

Table 1-2. System Messages (continued)
Message
Timer chip
counter 2 failed
TPM
configuration
operation
honored. System
will now reset.
TPM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
TPM failure
Unable to launch
System Services
image. System
halted!
50
About Your System
Causes
Faulty system board.
A TPM configuration
command has been entered.
The system will reboot and
execute the command.
This message displays during
system restart after a TPM
configuration command has
been entered. User
interaction is required to
proceed.
A Trusted Platform Module
(TPM) function has failed.
System halted after <F10>
keystroke because System
Services image is either
corrupted in the system
firmware, or the system
firmware has been lost due to
system board replacement.
Corrective Actions
See "Getting Help."
Information only.
Enter I or M to proceed.
See "Getting Help."
Restart the system and
update the Unified Server
Configurator respository to
the latest software to restore
full functionality. See the
Unified Server Configuration
user documentation or more
information.