Replacing The Fan Assembly - Dell PowerEdge R610 Hardware Owner's Manual

Figure 3-15. Removing and Replacing the Fan Assembly
1 FAN1
3 FAN3
5 FAN5
7 fan power cables (6)
9 fan assembly latches (2)

Replacing the Fan Assembly

1 Being careful not to pinch the cables connected to the backplane board,
replace the fan assembly in the chassis, and close the two latches to secure
the assembly.
2 Connect each fan's power cable to the power connectors on the system
board.
1
2
3
10
9
2
4
6
8
10
Installing System Components
4
5
FAN2
FAN4
FAN6 (dual-processor configurations
only)
fan power connectors (6)
fan blank (must be installed in single
processor configuration for proper
cooling airflow)
6
7
8
107