C O Nn Ec T I N Gt He Ma C Hi N E/ R Un Ni Ng Th Em A Ch I N E - Singer 6233 Manual

Connecting the Machine
The solid state system assures constant speed as you maintain the same pressure on the
controller when sewing through various fabric thicknesses.
Unwind the air control hose from foot oper-
ated speed controller.
Always be sure air hose is not blocked.
Pressing on the controller, you should feel a
slight air flow from the hose.
Plug this air hose onto the receptacle above
power cord, at the right end of the machine.
Then connect the electrical power cord plug
to your electrical outlet.
NOTE: When not using the machine,
rewind air hose around speed controller
for storage. as shown.
Do not oDerate machine without
material under the presser foot as this may
damage the feed and the foot.
To turn on machine and sewing light, slide
power switch left to "1" position, To turn ofi
machine and light, slide power switch right
to "0" position.
To run the machine, press the speed con'
troller. The harder you press, the faster the
machine will sew.
To stop the machine from sewing, remove
pressure from speed controller.
RunningtheMachine
The machine and the sewing light are turned on and otf by the same power switch.
1-
+-o