APRILIA RX 50 RACING - 2003 Manual page 67

ADJUSTING
THE ACCELERATOR CONTROL (Fig. 69)
The slack of the accelerator control must be about 2-
3 mm, measured on the the twist grip.
To adjust the slack, proceed as follows:
Remove the protection element (1).
◆
Release the nut (2).
◆
Act on the adjuster (3) placed at the beginning of
◆
the accelerator control cable.
Once you have carried out the adjustment, lock
◆
the nut (2) and put back the protection cover (1).
Fig. 69
67