1
REMOVING THE FRONT FAIRING
Remove the rearview mirrors, see page
120 (REMOVING THE REARVIEW
MIRRORS)
Place the vehicle on the stand, see page
82 (PLACING THE VEHICLE ON THE
STAND).
Turn the ignition switch to " ".
Remove the rearview mirrors, see page
120 (REMOVING THE FAIRING UPPER
FRONT COVERS).
Release the four plastic rivets (1) using a
flat-blade screwdriver.
Release and remove the screw (2) in the
centre.
CAUTION
Do not overtighten the screw (2) on
refitting, as it sits on plastic.
118
use and maintenance RSV 1000 R
2
Release and remove the snap-on
fasteners (3) securing the front fairing
to the side fairings.
Disconnect the two connectors (4) on
either side of the front fairing.
Disconnect the connector (5) on either
side of the front fairing.
Detach the front fairing (6) complete with
headlight.
M a k e s u r e t o r e f i t t h e e l e c t r i c a l
connectors (4) and (5) to the matching
connectors on assembly.
Handle plastic and paint-finished parts
w i t h c a r e t o a v o i d s c r a t c h i n g o r
damage.
- RSV 1000 RFACT
USA
USA
3
CAUTION
CAUTION
4
6
After refitting:
Set the rearview mirrors at the correct
angle.
5