APRILIA RSV 1000 R - 2003 Manual page 107

1
2
ASSEMBLING THE PINS FOR THE
REAR SUPPORT STAND
Place the vehicle on the stand, see p. 82
(PLACING THE VEHICLE ON THE
STAND).
Place the pin (1) on the appropriate
seat on the swinging arm.
Insert and tighten the screw (2) in the
appropriate threaded hole (3) in the
swinging arm.
1
3
5
PLACING THE VEHICLE ON THE
REAR SUPPORT STAND
Assemble the pins for the rear support
stand
THE PINS FOR THE REAR SUPPORT
STAND
NOTE
Have someone help you keep the
vehicle vertical with the two wheels on the
ground.
1
5
, see above (ASSEMBLING
).
use and maintenance RSV 1000 R
6
7
Slacken the knob (7).
Shift the fork-shaped support (6) so
that its width matches the distance
between the two pins (1) fitted to the
swinging arm.
Tighten the knob (7).
Slide both fork-shaped seats (6) of the
stand (8) underneath the pins (1) fitted to
the vehicle simultaneously.
Place one foot on the rear end of the
stand (8).
Push down on the stand (8).
CAUTION
Make sure the vehicle is stable.
- RSV 1000 RFACT
USA
1
8
107
USA