APRILIA RSV 1000 R - 2003 Manual page 108

Rest one foot on the rear part of the
stand (4).
Push (Pos. B) the stand (4) downwards
until it reaches the end of its stroke (see
figure).
WARNING
Make sure that the vehicle is stable.
If it falls over, it may cause damage to
bystanders and other property, as well
as being damaged itself.
108
use and maintenance RSV 1000 R
PLACING THE VEHICLE ON THE
FRONT SUPPORT STAND
Place the vehicle on the appropriate rear
s u p p o r t s t a n d
(PLACING THE VEHICLE ON THE
REAR SUPPORT STAND)
Lift (Pos. C) the front part of the stand
(8) and insert each of its ends (9) into
holes (10) in the bottom of the front fork.
Rest one foot on the front part of the
stand (8).
Push (Pos. D) the stand (8) downwards
until it reaches the end of its stroke (see
figure).
Make sure that the vehicle is stable.
If it falls over, it may cause damage to
bystanders and other property, as well
as being damaged itself.
- RSV 1000 RFACT
USA USA
10
9
8
, s e e p . 1 0 7
.
WARNING
FRONT WHEEL
WARNING
The disassembly and reassembly of the
front wheel can be difficult for those
unfamiliar with vehicle maintenance.
You may wish to have your Local april-
ia Dealer carry out these operations.
If you wish to perform these operations
y o u r s e l f , c a r e f u l l y
(MAINTENANCE).
While disassembling and reassembling
the wheel, pay extra care not to damage
the brake lines, discs or pads.
Before carrying out the following
operations, let the engine and the
exhaust silencer cool down until they
reach room temperature.
Failure to observe this warning can lead
to serious burns.
8
r e a d p . 8 4