APRILIA PEGASO 650 STRADA-TRAIL Manual page 22

Table of Contents

Advertisement

CODE RECOVERY
This function is used when the old code is
not available and you need to change it. In
this case it is necessary to insert at least
two keys in the ignition switch. The first key
is already inserted, a second key is
requested with the message:
"INSERT THE 2nd KEY"
The instrument panel remains on in-
between these two keys; if the second key
is not inserted within 20 seconds the
operation is aborted. When the second key
i s a c k n o w l e d g e d , t h e n e w c o d e i s
requested with the message:
"INSERT THE NEW CODE"
Once the operation is over, the display
goes back to DIAGNOSIS menu. If you
entered with the code, this operation will
not be allowed.
Once the operation is over, the instrument
panel goes back to SETTINGS menu.
22
use and maintenance Pegaso 650 I.E. STRADA - TRAIL
UNLOCK SAFETY LOCKS
In case of failure to the stand sensor, the
neutral and clutch switch, use function
"UNLOCK SAFETY LOCKS" to disable the
safety logic to be able to start the engine.
The display will show "SERVICE".
The safety logic is re-enabled when turning
the key off.
WARNING
This function should be used only in an
emergency.
Lap timer
When the LAP TIMER function is selected
the following options are displayed:
EXIT
VIEW TIMES
DELETE TIMES
VIEW TIMES
This function also displays the acquired lap
times. Briefly press the MODE selector to
the right and to the left to scroll the time
pages, press it for a certain time to set the
display back to the LAP TIMER menu. If
the battery is disconnected, stored times
are lost.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pegaso 650 stradaPegaso 650 trail

Table of Contents