APRILIA MX 125 - ED01 2004 Manual page 217

00
0:00
DST
1 RT
00
11:53:48
MODE
20
2
50
Programming the second vehicle
Keep the right push button pressed for about
5 seconds. The ≈WS∆ wheel diameter value of
the second vehicle will appear on the left
display. The menu relating to the second
vehicle will be automatically enabled after a
few seconds.
0
SPD
0
KM/H
00
1 DST
00
Keep the two outer push buttons
pressed for about 2 seconds to enable
the STANDARD SETTING programme
relating to the second vehicle (bike 2).
0
0:00
RT SPD
0
KM/H
11:53:48
MODE
CAUTION
21
1
55
MODE
WS CLOCK ODO
STANDARD SETTING
CAUTION
Keep the two outer push buttons
pressed for about 2 seconds to enable
the STANDARD SETTING programme.
This menu will allow you to modify the
wheel diameter, the time setting, the
vehicle lubrication and maintenance
interval, the total distance covered (ODO)
and the total race time (ART).
The metric system setting, KM/H to MPH
or vice-versa, can be modified only from
the START-UP SETTING menu.
use and maintenance MX 125
ART WS
25