Changing The Front And Rear Direction Indicator Bulbs - APRILIA MOJITO 150 - MANUEL 2 Manual

MC50 MC150
To access the bulbs:
Remove the headlight metal ring, see
"
page 76 (REMOVING THE HEADLIGHT
METAL RING ).
MC50 MC150
CAUTION
Work with care.
Do not force the electrical cables.
Partially remove the reflector (3).
To replace:
PARKING LIGHT BULB
CAUTION
To extract the bulb socket, do not pull
the electric wires.
Grip the bulb socket (4), and pull it out of
"
its seat.
Extract the parking light bulb (1) and
"
replace it with one of the same type.
MC50 MC150
LOW/HIGH BEAM BULB (HALOGEN)
CAUTION
To extract the bulb electric connector,
do not pull its wires.
" Grasp the bulb connector (5), pull it and
disconnect it from the bulb (6).
Release the clip (7) securing the bulb
"
(6).
Extract the bulb from its seat.
"
To refit:
NOTE
Fit the bulb into its socket,
making sure the locators coincide.
Fit a bulb of the same type.
"
Refit the clip (7).
"
Connect the bulb connector (5).
"
CHANGING THE FRONT AND REAR
DIRECTION INDICATOR BULBS
Carefully read page 93 (BULBS).
NOTE
Before replacing bulb,
M50 MC50
check the fuses, see page 91 (CHANGING
THE FUSES).
To replace:
Unscrew and remove the screw (1).
"
NOTE
When removing the protection
screen, make sure not to damage or break
the snap tangs (2).
Remove the protection screen (3).
"
NOTE
When refitting, make sure the two
tangs (2) fit fully into their recesses.
use and maintenance Mojito 50 - 150 95
USA