Front Direction Indicator Bulbs; Low/High Beam Bulb; Parking Light Bulb - APRILIA AREA 51 - 1998 Manual

FRONT DIRECTION INDICATOR BULBS

(3) AND (4)
To change the bulbs, proceed as follows:
Manually withdraw the protection ele-
ment of the bulb that must be replaced.
Press the two clips provided on the bulb
socket (9) with two fingers, while with-

drawing it from its seat at the same time.
Upon reassembly, insert the
bulb socket (9) with the clips in
vertical position and fit it in its seat; a
click will indicate that the bulb socket is
positioned correctly.
Press the bulb moderately, rotate it anti-
clockwise, extract it and replace it with a

new one of the same type.
Introduce the bulb in the bulb
socket, making sure that the two
guide pins coincide with the relevant
guides on the bulb socket.

LOW/HIGH BEAM BULB (5)

To change the bulb, proceed as follows:
Manually withdraw the protection ele-
ment (7)
Rotate the bulb socket (10) anticlockwise
and extract it.
Slightly press the bulb (5) and rotate it
anticlockwise, extract it and replace it
with a new one of the same type.

PARKING LIGHT BULB (6)

To change the bulb, proceed as follows:
Manually withdraw the protection ele-
ment (7).
Rotate the bulb socket (10) anticlockwise
and extract it.

Do not pull the electric cables to
extract the bulb socket.
Working on the left side (B), grasp the
parking light bulb socket (11), pull and
remove it from its seat.
Withdraw the parking light bulb (6) and
replace it with a new one of the same
type.
use and maintenance Area 51 55