Vertical Adjustment Of The Headlight Beam - APRILIA ATLANTIC 500 Manual

Hide thumbs Also See for ATLANTIC 500:
Table of Contents

Advertisement

10
ARRANGEMENT OF MAIN FUSES
(BATTERY COMPARTMENT)
– 30-A fuse (10)
From battery to: ignition switch, fuse (2),
helmet compartment light, cooling fan,
dashboard permanent power supply.
– 30-A fuse (11)
From battery to: voltage regulator, fuse
(3), fuse (5).
– 30-A fuse (12)
Spare fuse.
11
12
VERTICAL ADJUSTMENT OF
THE HEADLIGHT BEAM
This is a quick beam inspection procedure.
Place the motorcycle ten metres away from
a vertical wall. It is important that the
motorcycle be on level ground.
Switch on the low beam and sit astride the
motorcycle. The light spot on the wall should
be just below the horizontal line of the
headlight (about nine/tenths of overall height)
1
To set beam height:
Turn the knob (1) at the front of the vehicle
to adjust as follows:
turn CLOCKWISE to raise the beam;
turn ANTICLOCKWISE to lower the beam.
use and maintenance Atlantic 500
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents